SUSPENSION
Heavy-duty multi-spring suspensions 6 spring pack configuration for 3 axle. 9 blade 76mm wide and 14mm thick. This suspension is designed specifically for abnormal load vehicles operating in off road, sand and rugged conditions.

CHASSIS
Main inner 2 off fabricated I-beams with 130x20 “30 OAK” top and bottom flanges.
Main outer beams – 2 off fabricated I-beams with 100 x 16 “30 OAK” top and bottom flanges.
All webs minimum 6mm thick. All joints suitably welded and reinforced. Full width, full depth cross members fully support heavy deck loads. 

APRON PLATE
10mm thick rubbing plate in BS4360 grade 300WA, suitably reinforced with channels. Fitted with 50mm reversible kingpin and block. 

FIXED NECK
Full width sloping neck. Fabricated I-beams. Heavy-duty front rail. All linkage pins and bushes in EN8 hi-tensile steel. Timber on outside with center of neck in Chequer plate steel.

FLOOR
200mm wide x 50mm thick hardwood planks in Miliadora or Keruing timber. All suitably bolted down with 12mm mushroom head bolts on the underlying cross members. Heavy-duty chequer plate full width and full length over the suspension unit and down the center length of the lower deck. 

EXTENSIONS – SWINGOUT DESIGN (STANDARD)
Mild steel fabricated swing out extensions are fitted on each side of the lower deck extending the deck width from 2600mm to 3200mm. Timber floor planks to fit extensions are supplied loose on the deck.

LASHING EQUIPMENT
Extra heavy-duty lashing lugs are fitted down the entire length of the trailer including the neck, on both sides.

TYRES & WHEELS
13 off on 3 axle Lowbed.
12R22.5 16 PLY tubeless steel belt radial tyres (including 1 spare) in dual fitment in hi-tensile 900 x 22.5 x 10 stud offset wheel rims are fitted.

AIR BRAKE SYSTEM
Two line air brake system with spring brake actuators on all 3 axles and conforming to latest SABS 1207 specifications. ABS brakes and automatic slack adjusters fitted.

ELECTRICS
Standard 7 pin sockets in 12 or 24-volt operation with double tail, stop and indicator “Truck Light” lamps. A number plate light is also fitted. Reflectors, chevron boards and abnormal signboards with flags are provided. Reflective tape is fitted to the rear and to both sides of the Lowbed.

TOOLKIT
1 x 50 ton capacity hydraulic bottle jack. 1 pair warning triangles. 1 wheel spanner and Tommy bar. An extra large capacity heavy-duty toolbox is built into the area between the main beams at the front of the lower deck.

PAINTING
A high quality Q.D. enamel – minimum 2 coats on base primer coat applied. Final colour to match your corporate colour. Payloader use the SALCOMIX PAINTING SYSTEM from the Glasrut Group  of companies, part of the BASF Group. We are fully equipped with our own mixing machine, computer and all equipment to give you the perfect colour of your companies choice ( or a wider range of colours) with SOLCOMIX 603 – 2K acrylic topcoat(TPC-ACR). Giving an excellent weathering resistance, with a high surface hardness and good gloss. Now with our in house , colour-mixing laboratory, Payloader is able to satisfy your every paint requirement. Payloader can offer a 1 year warranty certificate on each and every trailer on the paint system.

This drawing is the property of Payloader and cannot be copied or disclosed to a third party without their written consent.