AXLES
Propar hollow round axle beams. 1910-1930mm track, 420mm x a80mm Scam brakes. Heavy duty 15-ton capacity axles. 10 Stud on 335 PCD fitment.
DISCLAIMER
(Henred Fruchauf/Go/York) Standard propar axles are supplied and fitted and are subject to change without prior notice. Unless specified otherwise by the cutomer.
SUSPENSION
Heavy duty multi-spring mechanical suspensions 6-spring pack configuration for 3-axle.8-blade 76mm wide and 14mm thick. This suspension is designed specifically for abnormal load vehicles operating in off-road , sandy and rugged conditions.
CHASSIS
Main inner 2 off fabricated 1-beams with 130 x 20 ROQ TUF AM 700 top and bottom flanges. Main outer beams – 2 off fabricated 1-beams with 100 x 16 “3D oak” top and bottom flanges.All webs min 6 mm thick. All joints suitably welded and reinforced. Full width, full depth cross members fully support heavy deck loads.
APRON PLATE
10 mm thick rubbing plate in BS4360 grade 300WA , suitably reinforced with channels. Fitted with 50mm king pin and block.
HYDRAULIC NECK
2x cylinders 125/80 double acting , 1240 mm closed centres 780 mm stroke.
4x pins 1SSS x 60mm with split pin holes.
Only Wet Pack to operate two cylinders consisting of :
- 1 x 3.7 Kw Petrol Motor @ 2600 RPM
- 1 x Close coupled gear pump 3.8cc flow rate +/- 9 liter per min
- 1 x 40 liter hyraulic tank complete with return line filter lever temperature gauge and filter breather
- 1 x 3/8” Single Bank Directional valve
- 1 x Pressure gauge flange mounted
- 1 x Frame
- 1 x Hose Kit
FLOOR
Entire floor to be 6/5mm thick chequer plate steel.
EXTENSIONS – SWINGOUT DESIGN ( STANDARD)
Mild steel fabricated swing out extensions are fitted on each side of the lower deck extending the deck width from 2600 mm to 3200 mm. Timber floor planks to fit extensions are supplied loose on the deck.
LANDING LEGS
Jost heavy duty series, 2 speed, high strength steel construction, with heavy duty fixed sand shoe, near side operation. Rigid cross bracing supports designed to withstand load at any angle.
TYRES & WHEELS
13 off on 3-axle lowbed.
12R 22.5 16 PLY tubeless steel belt radial tyres ( including 1 spare) in dual fitment in hi-tensile 900x22.5x10 stud offset wheel rims are fitted.
AIR BRAKE SYSTEM
Two line air brake system with spring brake actuators on al 3-axles and conforming to latest SABS 1207 specifications. ABS brakes and automatic slack adjusters fitted.
ELECTRICS
Stendard 7-pin sockets in 12 or 24-volt operation with double tail, stop and indicator “ Truck Light” lamps. A number plate light is also fitted. Reflectors, chevron boards and abnormal signboards with flags are provided. Reflective tape is fitted to the rear and to both sides of the lowbed.
TOOLKIT
1 Pair warming triangles. 1 wheel spanner and tommy bar. An extra large capacity heavy-duty toolbox is built into the area between the main beams at the front of the lower-deck.
PAINTING
A high quality Q.D enamel – minimum 2 coats on base primer coat applied. Final colour to match your corporate colour. Payloader use the SALCOMIX PAINTING SYSTEM from the Glasrut group of companies, part of the BASF group. We are fully equipped with our own mixing machine , computer and all equipment to give you the perfect colour of your companies choice ( or a wider range of colours) with SOLCOMIX 603 – 2K acrylic topcoat(TPC-ACR). Giving an excellent weathering resistance, with a high surface hardness and good gloss. Now with our in house, colour mixing laboratory, Payloader is able to satisfy your every paint requirement. Payloader can offer a 1- year warranty certificate on each and every trailer on the paint system.
|
