BODY
35 cub metre capacity bin in 3mm Supraform TM 340 – 600 steel. 5mm to tipping side and 3mm on non-tipping side. A rollover tarpaulin and platform are fitted.

HYDRAULICS
One off, single stage ram, each side of body.

AXLES
Propar Axle, 3 off per trailer, tubular 127mm (16mm wall thickness) hollow round beams in hi-tensile T16V material, heat-treated in three-piece configuration. Rated at 11 tons capacity. Foundation brakes are (Duron P2008 / FERODA 3658) 420x180 “S” cam operated on automatic slack adjusters with ABS braking system. Spring brake boosters are fitted to each axle. Brake linings are manufactured to S.A.B.S 1056 specifications. Wheel studs are 10 studs fitment on 335 PCD (pitch circle diameter). Bearings (21 roller) are interchangeable inner and outer 90mm diameter precision ground parallel journals and bearing face-hardened. Axle track length will be compatible with that of truck tractor at 1930mm. Brake drums are machined from S.A.B.S 250 gray iron material (BS1452-1990 GR300). Hubs are machined from S.A.B.S SG. 42 material.

SUSPENSION
Mechanical suspension. Heavy-duty spring packs in a 8-blade configuration. Positive axle alignment is achieved by fixed and adjustable rubber bushed heavy-duty torque arms. Equal weight distribution and load transfer is achieved through fabricated heavy-duty rubber bushed balance beams. Suspensions are manufactured according to TUV European Certification.

TYRES AND RIMS
12R 22,5 tubeless tyres (13 off inclu. 1xspare) complete with 9.00x22.5 disc type rims, 11mm thick nave, 10 stud in dual fitment.

LEGGEAR
Propar Axle 2 speed, heavy-duty wind-up leggear is fitted to both trailers.

TOOLBOX
Standard 900x450x400mm toolbox is fitted.

BRAKES
Two line air brakes with spring brake boosters are fitted.
ABS brakes and Automatic Slack Adjusters fitted.

CHEVRON & TAILBOX
Standard mild steel tail box with chevron and yellow reflective tape.

PAINTING
The trailers will be thoroughly cleaned and degreased and a base primer applied. Minimum 2 coats 2K enamel paint to your corporate colours. Payloader use the SALCOMIX PAINTING SYSTEM from the Glasrut Group  of companies, part of the BASF Group. We are fully equipped with our own mixing machine, computer and all equipment to give you the perfect colour of your companies choice ( or a wider range of colours) with SOLCOMIX 603 – 2K acrylic topcoat(TPC-ACR). Giving an excellent weathering resistance, with a high surface hardness and good gloss. Now with our in house , colour-mixing laboratory, Payloader is able to satisfy your every paint requirement. Payloader can offer a 1 year warranty certificate on each and every trailer on the paint system.